 |
| Mixing Pebble
with Cement - The Pebble Tec®
or Pebble Sheen®
stones are mixed with cement, water and
additives in a unique formula perfected
over years of research and experience. |
| |
 |
| Pneumatic Application
- This formulation is then pneumatically
applied to the pool or spa interior. |
| |
 |
| Hand Trowel
- Installers use a hand trowel method,
one small area at a time, to ensure the
mixture is formed into an even surface. |
| |
 |
| Aggregate Exposure
with Water Wand - After the application
is finished, the entire pool is sprayed
down with water. This exposes the pebbles
and removes excess cement. |
| |
|
| Acid Wash
- A hardening period, normally 24 hours,
is followed by a final cleansing treatment.
A special solution is used to enhance the
brightness of the natural pebbles. |
| |
|
| Buffing and Pressure
Water Cleansing (only applies to
Pebble Sheen®
pool finish) - A light buffing process occurs
during the cleansing treatment. |
| |
|
| Completion
- There is no
waiting time for plaster dust removal. Once
the Pebble Tec®,
Pebble Sheen®
or Pebble Fina®
pool finish installation process is complete,
simply fill the pool with water, balance
the water with chemicals and begin swimming.
|
